1940-01-15 - Laserfiche WebLink

Browse Search

5 SECTION IV. THE PRELIMINARY PLAT. The preliminary Plat shall be prepared by a competent surveyor or designer, preferably at a scale of forty feet to the inch, and shall show the following information: (1) Subdivision name, date, scale, and north point. (2) Names and addresses of record owner, subdivider, and surveyor or designer. (3) Location and names of owners of adjacent properties. (4) Location, names, and present widths of all existing streets, alleys, or public properties in or adjacent to the parcel to be subdivided. (5) Width and location of all proposed streets and other ways, building lines, and easements, and profiles, at appropriate scales, of all proposed streets. (6) Location and approximate dimensions and areas of all proposed lots and public properties, if any. (7) Proposed method of surface drainage and sewage disposal. (6) Proposed or anticipated uses of property. ' (9) Topography, with two -foot contour interval unless the Board specified otherwise. SECTION V. THE FINAL PLAT. The Final Plat as submitted to the Board shall be clearly and legibly drawn in water- proof black ink on tracing c;oth. The sheets shall be 20 by 30 inches overall, and shall have half-inch margins on three sides and an inch -and -one-half margin on the fourth; the wider margin shall be at the left side or the top, whichever is the 20 -inch dimension. The drawings shall be at a scale of 40 feet to the inch unless the Board shall designate otherwise. The Final Plat shall show: (1) Subdivision name, date, scale, northpoint, and legend. (2) Names and addresses of record owner, subdivider, and surveyor or designer. (3) Location and names of owners of adjacent properties. (4) Proposed street and alley lines, lot lines, building lines, drainage structures, reservations, easements, and areas to be dedicated to public use, and all existing buildings, walls, drives or other fixtures abutting on or near to the proposed streets.