1986-03-03 to 1986-05-12-ATM-min

Browse Search

34 (Adjouthed Session of the 1986 Annual Town Meeting - April 14, 19$6) Article 41. (Motion as attached to the Planning Board Re ort and as ado ted (Cont.) (Cont.) A3) In sub - section 9.2.9, by deleting the first paragraph in its entirety and by inserting in place thereof two paragraphs, as follows: "9.2.9 DENSITY: The maximum number of dwelling units on a tract in a planned residential development shall be the lesser of: 1) the product of the following formula: multiply the developable site area (see 7.9) by 0.85 and divide the product by the mini- mum lot area for the district in which the lot is located (R0= 30,000 sf, RS and RT- 15,500 sf), provided any fraction thereof shall not be credited toward another dwelling unit, or 2) the number of lots complying with the minimum lot area, lot (As frontage and lot width requirements for a conventional sub- adopted) division as shown on the "proof" plan required below." and "To determine the maximum number of dwelling units permitted in a planned residential development, an applicant shall submit a certified calculation of the developable site area (see7.9) and the calculation described in 1) above; and a "proof plan" of the tract showing a lot layout and street layout only, complying with the Planning Board's "Development Regulations "." A4) In Section 2, Definitions: 1) in the definition "CLUSTER DEVELOPMENT" by deleting the word: ... "DEVELOPMENT "... and inserting in place thereof the word "SUBDIVISION" and by inserting the words: "on lots" before the words: ... "in one or more groups"... so that the definition, as amended will read: "CLUSTER SUBDIVISION A planned residential development in which buildings are constructed on lots in one or more groups separated from adjacent property and other groups of buildings by inter- vening open land. The density, dimensional standards or types of buildings permitted may vary from those otherwise permitted or required." i and 2) by inserting in the proper alphabetical sequence a new �> definition, as follows: "SPECIAL RESIDENTIAL DEVELOPMENT: A planned residential development, which may be on one or more lots, in which considerable design flexibility is allowed if a development meets design criteria as set forth in Section 9. The dimensional standards, types of buildings permitted and density may vary from those otherwise permitted or required." A5) In the NOTE following sub - section 9.2.8 by deleting the existing wording and by inserting in place thereof: "NOTE: In an R0, RS or RT district, a planned residential development may be: 1) a conventional (conv) subdivision, 2) a cluster (clus) subdivision, with the tract divided into separate lots for dwellings and common open space, or 3) a special (spec) residential development in which the tract may be in one ownership or may be divided into separate lots for dwellings and common open space. "; and in Section 9.2 by inserting a new line under the headings of the columns in the table as follows: under the columns headed "RO" and "RS,RT" the symbols: "(conv) (clus /spec)" A6) In Table 1, Use Regulations Schedule, in line 1.6 by deleting all the words after ... "rooming units) "... and the symbols under the columns headed RO -RS, RT and RD and inserting in place thereof: